About the Rainhandler gutter
Here is the modern gutter you have been looking for..
The Rainhandler gutter is a state-of-the-art rain dispersal system invented by an M.I.T. aeronautical engineer. Now improved with three more patents, the Rainhandler gutter provides superior dispersal and strength. For two decades thousands of American homeowners have replaced messy and unsafe gutters and downspouts by installing the modern Rainhandler gutter the proven and practical system for rainwater dispersal – never clean or maintain an old fashioned rain gutter again.
Unique louver design allows leaves and debris to blow or wash away. A gutter collects leaves and debris.
The Rainhandler self-cleaning gutter system eliminates clogged, over-flowing gutters and downspouts. No ground erosion. No more destructive ice dams from a frozen gutter.
The Rainhandler gutter is self-cleaning and protects you from the need to climb dangerous ladders and roofs to clean a clogged gutter
Roof runoff is converted to a 2 to 3 foot wide band of soft rain-sized droplets sprinkling the landscape. A clogged gutter spills over at it’s low spot and erodes your beds and can undermine your foundation.
The all-aluminum, never-rusting, maintenance-free Rainhandler gutters make messy, deteriorating rain gutters and downspouts history.
The Rainhandler gutter system is practically invisible. No gutters, downspouts, leaders or splash blocks to detract from the natural beauty of your home.
This accessory diverts roof runoff away from an unprotected door to the adjacent RainhandleR sections for dispersion. Mounts to your roof shingles with self-adhesive. Choose brown for a dark-colored roof and natural aluminum for a light-colored roof.
Rainhandler gutters come with a 25-year manufacturer’s warranty. Performance satisfaction is guaranteed or returns Rainhandler within one year for a full refund.
Easy to Install
Each 5-foot section easily snaps into three brackets which are screwed into the fascia board. Couldn’t be simpler. And the miracle of our engineering: each 1 pound section can support up to 150 pounds of weight. If you don’t want to install the Rainhandler gutter yourself, as most of our customers do, just use a local handyman – no special skills required.
Measuring for Your Order
You merely measure the linear footage of the drip edge on your roof, and divide by 5 feet, the length of each Rainhandler section. If you end up with a fraction, round off to the next 5 foot increment.
The Handyman club Seal-of-Approval is recognized by hundreds of thousands of Handyman Club members. We received a perfect “10″ score. We have been tested with excellent results at Associated Testing Laboratories, Sears Laboratories, and by Al Carrell, The Super Handyman, who featured Rainhandler in his book.